Company contact number：8621-56302847

Jiafu rubber floor

Non standard customized arbitrary tailoring

1、Products with good abrasion resistance, dirt resistance, environmental protection.

2.、Fire flame retardancy, mute.

3、Product has impact resistance,slip resistance,shock absorption effect.

4、Products have not deformation,not cracking become warped edge and low inflation index.

5、Around the product is suitable for use in airport,metro，hospital, shopping malls, schools,and industry etc.

Buffer rubber floor

Product features：

Specification of Jiafu brand rubber floor covering

Test item	Standard request	Measured value
Hardness(Glenn Schorr·A)	≥75A	80A
Tearing strength	≥25 KN/m	30 KN/m
Tensile strength	≥9 KN/m	10 KN/m
Abrasion performance	≤200 mm3	150 mm³
Heat size variability	≤±0.4%	-0.12%
Compression set	≤0.2mm	0.09mm
Resistance of cigarette clcination	No burn marks	No burn marks
Fire resistance	≥B1	B1
Resistance to chemical pollution	No surface change	No surface change
The light resistance	≥Grey card grade 3	Level 3
Resistance to bending performance	Φ220mm Bending of metal bar 180° No crack	No crack
Adhesion strength between solid layer and buffer layer	≥ 20MPA	30

RSuggestions on storage, transportation and laying of rubber flooring

1、Rubber floor in the ambient temperature below 5℃, as far as possible to avoid handling uncoiling or rolling material.
2、Rubber floor rolls should be placed vertically in the direction indicated
3、48 hours before the laying of rubber floor rolls,please store the rolls indoors at least 15℃,and the minimum temperature for laying shall not be less than 10℃.
4、The highest indoor temperature is recommended not to exceed 38℃.
5、24 hours before the formal laying of rubber floor coils, please make pre-laying adjustment according to the laying serial number.
6、Lay and install in the same area in strict accordance with the laying serial number on the coil label.
7、Adhesive used for laying and installing rubber floor rolls, please select the adhesive with high shear strength.